Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma…
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Thule's Gate Mate is made from heavy-duty vinyl with foam padding that protects both your bike and your truck's tailgate. Integrated Knock-Blocks prevent your bikes from sliding off the edge of the tailgate and causing damage to your vehicle and/or bike. Nylon straps keep the pad securely attached…
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.
The Saris B.A.T. Light tells nocturnal travelers behind you to give your beloved bikes some space. The B.A.T. light replaces the reflector on the end of your B.A.T. rack and plugs into your vehicle's trailer harness. The wiring runs cleanly inside the rack so it won't get caught up in your bikes.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 10 SKS Cores and matching keys - 2 keys included plus a control key
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface -…
Yakima Tracks offer easy connectivity, and a low profile when the towers are removed. Combine the Tracks with Yakima Control Towers plus a set of their Landing Pads and you have a versatile, adjustable base for your rooftop car rack system (towers, pads and accessories sold separately). The Tracks…
• Keep your greasy, dirty Hi-Lift Jack up and out of the way
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Anything you can put on the water you can put on a pair of these 20 foam pads. Theyre designed to protect your gear and crossbars during loading and on the road. - Fits round and square crossbars. - 20" wide foam pads for flexible configuration - Fits Yakima round and square crossbars Works great…
- Creates up to two mounting points for Bow/Stern Tie-Downs on vehicles without easy access mounting points - Two nylon looped straps that can be mounted directly to the vehicle inside the hood
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of…
- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2
Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but youll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and…
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 12 SKS Cores and matching keys - 2 keys included plus a control key
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach…
The Thule Xadapt 10 Adapter Kit makes it possible to connect Thule kayak carriers to Thule AeroBlade load bars. Please contact us with any questions regarding compatibility.
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.