Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Seatposts

Strider Extra-Long Seatpost w/Saddle
$14.40
Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.
Odyssey Pivotal Seat Post
$29.99
It’s a traditional straight up pivotal design with a 200mm length.
Odyssey Tripod Post
$25.99
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
3T Ionic 25 Pro
$110.00
3T's Ionic aluminum seatpost is stiff, durable, and features their Driftlock seat clamp assembly for 25mm of setback. This gives you the option of a more rearward position on today’s shorter framesets. The splined aluminum DiffLock coupling is a highly accurate method of setting saddle angle needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle.
Whisky Parts Co. No.7 Seatpost
$95.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
Thomson Elite Covert Dropper Seatpost
$449.95 - $479.95
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
Thomson Masterpiece Setback Seatpost
$149.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Thomson Elite Dropper Seatpost
$449.95 - $479.95
Keep the flow going with Thomson's Elite Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and boasts Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
Thomson Elite Setback Seatpost
$99.95
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Thomson Masterpiece Seatpost
$149.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Thomson Elite Seatpost
$99.95
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Race Face Chester Seatpost
$34.99
The Chester seatpost from Race Face is a durable, no-nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities. Features • Seat tube drawn from 6061 Alloy • Proven dual bolt, multi-adjustable head design. • Shot peened for high impact strength & fatigue resistance.
Race Face SIXC Seatpost, I-beam Rail
$139.99
- Intended for cross country, all-mountain, enduro and downhill use - Patented I-Beam Micro System- single bolt head with precise fore, aft and angle adjustment - The shaft is manufactured with a leading edge composite material allowing high strength at an impressively low weight. The engineered carbon layup tube offers outstanding fatigue & - Head is made of cold-forged AL -6061; clamps are AL-2014 - Easy-access 5mm bolt for quick and simple saddle adjustments - 190 grams
Race Face Next Seatpost
$129.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
Race Face Atlas Seatpost, I-beam Rail
$109.99
- Intended for cross country, all-mountain, enduro and downhill use - Patented I-Beam Micro System- single bolt head with precise fore, aft and angle adjustment - Easy-access 5mm bolt for quick and simple saddle adjustments - Elliptically extruded & CNC machined from AL-2014; Optimized for weight and strength - Use with Atlas I-beam saddle
KS LEV-DX Seatpost
$379.00 - $429.00
- Aluminum dropper post with alloy trigger/clamp and cable junction cap - 100, 125 or 150mm drop options with the same air/oil system as the original LEV - Stationary remote cable routing, locates housing stop below the center collar - Housing stop rotates 360 degrees - 100mm drop, 335mm length post - 125mm drop, 385mm length post - 150mm drop, 435mm length post
KS Supernatural Seatpost
$305.00 - $366.00
The KS Supernatural dropper post has exact same design/function as the i950, except with updated graphics and packaging. Inline head means less stress on bushing, especially for DH, Freeride. Improved bushing design for smooth operation under load with no side-to-side play. - External cable routing to the saddle clamp - Infinitely-adjustable ride height - Micro-adjust, zero offset clamp - KG alloy remote can replace an inner ODI grip clamp or can be mounted as a stand alone - Hard anodized stanchion
KS Ether Aluminum Seatpost
$109.90
- Gravity-approved butted, heat treated aluminum mast with black on black graphics - Uses the same two-bolt seat clamp found on the LEV, featuring titanium bolts - 260g (30.9mm)
KS LEV-Carbon Seatpost
$589.00
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
KS LEV-Ti Seatpost
$439.00 - $499.99
- Aluminum dropper post with titanium bolts, carbon remote, superlight Powercordz cable and carbon lower head clamp - 100, 125 or 150mm drop options with the same air/oil system as the original LEV - Stationary remote cable routing - Housing stop rotates 360 degrees - 100mm drop, 335mm length post - 125mm drop, 385mm length post - 150mm drop, 435mm length post
KS Ether Carbon Seatpost
$165.13
- Gravity-approved butted unidirectional carbon mast with black on black graphics - Uses the same two-bolt seat clamp found on the LEV, featuring titanium bolts - 188g (30.9mm)
KS LEV-CI Seatpost
$559.00
- Internally routed carbon body dropper with carbon saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Locks anywhere in vertical range, so post will not extend when lifting the saddle - 400mm length
KS Dropzone (I900) Seatpost
$275.00
The Dropzone take our Supernatural powers and brings them closer to earth…dirt, mud and rocks, that is. Built with a layback head for when the pitch gets steep and the distance between you and the ground gets interesting. The Dropzone’s 125mm of silky smooth travel sums up all that is elegant about this post. Everything else about it is low, hunkered, down and dirty. - Dropzone has exact same design/function as the i900, except with new graphics and packaging - 30mm setback version of KS's on-the-fly height adjustable aluminum seatpost with two release options - Improved bushing design for smooth operation under load - 385mm length
KS eTen Seatpost
$150.00 - $175.00
- Affordable hydraulic cartridge height adjustable post with two release options - Aluminum construction with adjustable air preload, 100mm range of height lock - 1-bolt micro-adjustable seat rail clamp, 20mm offset head - Remote model: includes handlebar-mounted remote - 100mm drop - 385mm post length
KS LEV-272 Integra Seatpost
$425.00
LEV Integra 272 has always represented the latest technology but is already a classic among top contending dropper posts. With a myriad of firsts to it’s name; first hydraulic dropper to offer zero cable movement, first dropper to offer adjustable rotational orientation, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV comes back ready to be the first dropper seatpost to outperform itself. - Internally routed aluminum dropper - Locks anywhere in vertical range, so post will not extend when lifting the saddle - 2-bolt micro-adjustable seat rail clamp, angled bolts increase clamp strength - Patented one-way roller clutch bearing - Remote features alloy remote handlebar release lever, inline barrel adjuster and braided cables (ODI Lock-On grip compatible) - 533g - 400mm length
Easton Haven Seatpost
$89.99
Light and durable, Easton's Haven Seatpost is what your mountain bike has been waiting for. It boasts TaperWall technology that customizes the thickness of the aluminum walls to maximize strength without excess material. Plus, the cold-forged aluminum head is as strong as they come and the two-bolt clamp offers precise, easy adjustments.
Easton Haven Carbon Seatpost
$149.99
Impressively light and durable, Easton's Haven Carbon Seatpost is what your mountain bike has been waiting for. This carbon beauty boasts TaperWall technology that customizes the thickness of the carbon walls to maximize strength without excess material. Easton's Relief Area Design ensures safe, secure clamping by the seatpost collar, too. Plus, the anodized magnesium saddle clamp is as strong as they come and the two-bolt design delivers precise, easy adjustments.
Crank Brothers Cobalt 11 Seatpost
$220.00
Crank Brothers' Cobalt 11 Seatpost utilizes the company's innovative design sense and cutting-edge materials for a post that is as stiff and light as it is beautiful. Its high-modulus carbon shaft trims grams and the single-bolt head allows for quick, precise seat angle and setback adjustments.
Crank Brothers Cobalt 3 Seatpost
$100.00
Crank Brothers applied their years of component manufacturing expertise to the Cobalt 3 Seatpost. Its 7075-aluminum shaft is light and stiff, and the CNC'd single-bolt head allows for quick, precise seat angle and setback adjustments. Plus, measurement dots are etched into the post to make dialing in the perfect seat height a snap.
Crank Brothers Highline Dropper Seatpost
$350.00
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years
Page 1 of 5 Next page